Evolynx RADIUS can be used for VoIP Authorization and Accounting. The following
steps describe how to setup your RADIUS server for VoIP use. This procedure has
been tested with Cisco prepaid IVRs.
Note: Make sure your IVR script is not set to overload
the acct-session-id. To disable overloading, use following command:
no attribute acct-session-id overloaded
- Install both Server and Admin programs version 1.7 (or higher).
- Enable the VoIP features by changing the EnableVoIP switch in both configuration
files.(See how)
- In Admin program, define a new Service. Enter all information as you need. A typical
service setting is shown in the following picture:
- To define calling rates for each country code, click on "VoIP Prices"
link. A new page appears which shows a list of "Country Codes" and prices.
When you first create a Service, this list will be empty. Click on "Add"
button to add new entries to this list. The following shows the data entry page
for new Country_Code/Price:
- After entering prices for some country codes, the "VoIP Prices" page will
look like the following picture:
If you need to define different prices for different area codes in a country, simply
add separate entries for each area code so the "Country Code" field will
show country code followed by the area code.
- Now you can define a Customer for each Pre-paid card, and assign this service to
that customer and add the Card's PIN number as Login ID and Card's serial number
as the password.
Note:
To simplify data entry for VoIP rates (prices), Evolynx Web Admin lets you create
a comma separated text file containing prices and upload it. This file must contain
one area code/price combination per line, and area code must be separated from the
price by a comma. For example:
1 , 0.05
44 , 0.07
213 , 0.14
There is an upload button in the above picture which displays the following page
as a popup, and lets you select a file to upload. Click on "Browse..." button and
select the file, then click on "Upload File" button.
|